Do c u Co lo r 80 0 0/ 70 0 0 S y s te m A dm i n is t r a ti o n G u id e
4. After entering the New Value number, press the Start
button. The UI displays the following screen:
5. Touch the Close button to save and close your new setting.
6. Exit Tools Mode and run your print job.
KEY POINT 1: After running your print job, reenter Tools Mode,
NVM Read/Write, and
switch off
on. Follow the steps outlined in this procedure and use these
settings for the New Value number:
•
To switch off the Special Media Setting for Drilled Papers,
enter 1000.
•
To switch off the Special Media Setting for LEF Tab Stock,
enter 0.
•
To switch off the Carbonless Media, enter 0.
KEY POINT 2: To prevent paper jams from occurring with stock
types other than the ones mentioned in this procedure, you must
switch off the NVM Read/Write feature before running other print
jobs.
1 . Too l s M od e
the feature that is currently
1-11