Ip-Range - TP-Link TL-SL2428 User Manual

When applying for a multicast group, the host will send IGMP report message. After receiving the
report message, the switch will firstly check the multicast filter rules configured for the receiving
port. If the port can be added to the multicast group, it will be added to the multicast address table;
if the port can not be added to the multicast group, the switch will drop the IGMP report message.
In that way, the multicast streams will not be transmitted to this port, which allows you to control
hosts joining the multicast group.

8.3.1 IP-Range

On this page you can figure the desired IP-ranges to be filtered.
Choose the menu Multicast→Multicast Filter→IP-Range to load the following page.
The following entries are displayed on this screen:
Create IP-Range

IP Range ID:
Start Multicast IP:
End Multicast IP:
IP-Range Table

IP-Range ID Select:
Select:
IP-Range ID:
Start Multicast IP:
End Multicast IP:
Figure 8-10 Multicast Filter
Enter the IP-range ID.
Enter start multicast IP of the IP-range you set.
Enter end multicast IP of the IP-range you set.
Click the Select button to quick-select the corresponding IP-range
ID based on the ID number you entered.
Select the desired entry to delete or modify the corresponding
IP-range. It is multi-optional.
Displays IP-range ID.
Displays start multicast IP of the IP-range.
Displays end multicast IP of the IP-range.
86