TP-Link TL-SL2428 User Manual page 77

24-port 10/100mbps + 4-port gigabit smart switch
Hide thumbs Also See for TL-SL2428:
Table of Contents

Advertisement

Configuration Procedure
Configure Switch A:
Step Operation
1
Configure ports
2
Enable STP function
3
Configure the region name and
the revision of MST region
4
Configure
mapping table of the MST region
Configure Switch B:
Step Operation
1
Configure ports
2
Enable STP function
3
Configure the region name and
the revision of MST region
4
Configure
mapping table of the MST region
5
Configure switch B as the root
bridge of Instance 1
6
Configure switch B as the
designated bridge of Instance 2
Description
On VLAN→802.1Q VLAN page, configure the link type
of the related ports as Trunk, and add the ports to VLAN
101 and VLAN 106. The detailed instructions can be
found in the section 802.1Q VLAN.
On Spanning Tree→STP Config→STP Config page,
enable STP function and select MSTP version.
On Spanning Tree→STP Config→Port Config page,
enable MSTP function for the port.
On Spanning Tree→MSTP Instance→Region Config
page, configure the region as TP-LINK and keep the
default revision setting.
VLAN-to-Instance
On
Config page, configure VLAN-to-Instance mapping
table. Map VLAN 101, 103 and 105 to Instance 1; map
VLAN 102, 104 and 106 to Instance 2.
Description
On VLAN→802.1Q VLAN page, configure the link type
of the related ports as Trunk, and add the ports to VLAN
101 and VLAN 106. The detailed instructions can be
found in the section 802.1Q VLAN.
On Spanning Tree→STP Config→STP Config page,
enable STP function and select MSTP version.
On Spanning Tree→STP Config→Port Config page,
enable MSTP function for the port.
On Spanning Tree→MSTP Instance→Region Config
page, configure the region as TP-LINK and keep the
default revision setting.
VLAN-to-Instance
On
Config page, configure VLAN-to-Instance mapping
table. Map VLAN 101, 103 and 105 to Instance 1; map
VLAN 102, 104 and 106 to Instance 2.
On
Config page, configure the priority of Instance 1 to be 0.
On
Config page, configure the priority of Instance 2 to be
4096.
Spanning
Tree→MSTP
Spanning
Tree→MSTP
Spanning
Tree→MSTP
Spanning
Tree→MSTP
70
Instance→Instance
Instance→Instance
Instance→Instance
Instance→Instance

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents