Storm Control Config
Port Select:
Select:
Port:
Broadcast Rate (bps):
Multicast Rate (bps):
UL-Frame Rate (bps):
LAG:
Note:
If you enable storm control feature for the ingress rate limit-enabled port, ingress rate limit feature
will be disabled for this port.
Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select the desired port for Storm Control configuration. It is
multi-optional.
Displays the port number of the Switch.
Enable/Disable broadcast control feature for the port.
Enable/Disable multicast control feature for the port.
Enable/Disable UL-Frame control feature for the port.
Displays the LAG number which the port belongs to.
100
Return to CONTENTS