TP-Link TL-SL2428 User Manual page 103

The following entries are displayed on this screen:
DSCP Priority Config

DSCP Priority:
Priority Level

DSCP:
Priority Level:
Note:
To complete QoS function configuration, you have to go to the Schedule Mode page to select a
schedule mode after the configuration is finished on this page.
Configuration procedure:
Step Operation
1 Log on to the DSCP Priority
page
2 Enable DP priority function
Figure 9-8 DSCP Priority
Select Enable or Disable DSCP Priority.
Indicates the priority determined by the DS region of IP datagram.
It ranges from 0 to 63.
Indicates the priority level the packets with tag are mapped to. The
priority levels are labeled as TC0, TC1, TC2 and TC3.
Description
Required. By default, the DSCP priority function is
disabled.
96