TP-Link TL-SL2210WEB User Manual
  1. Manuals
  2. Brands
  3. TP-Link Manuals
  4. Switch
  5. TL-SL2210WEB
  6. User manual
TP-Link TL-SL2210WEB User Manual

TP-Link TL-SL2210WEB User Manual

9-port gigabit web smart switch; 8-port 10/100mbps + 2-port gigabit web smart switch; 16-port 10/100mbps + 2-port gigabit web smart switch; 24-port 10/100mbps + 4-port gigabit web smart switch; 48-port 10/100mbps + 4-port gigabit web smart switch
Hide thumbs Also See for TL-SL2210WEB:
Table of Contents

Advertisement

Quick Links

User's Guide
TL-SG2109WEB
9-Port Gigabit Web Smart Switch
TL-SL2210WEB
8-Port 10/100Mbps + 2-Port Gigabit Web
Smart Switch
TL-SL2218WEB
16-Port 10/100Mbps + 2-Port Gigabit
Web Smart Switch
TL- SL2428WEB
24-Port 10/100Mbps + 4-Port Gigabit
Web Smart Switch
TL-SL2452WEB
48-Port 10/100Mbps + 4-Port Gigabit Web
Smart Switch
Rev: 1.0.3

Advertisement

Table of Contents
loading

Related Manuals for TP-Link TL-SL2210WEB

Summary of Contents for TP-Link TL-SL2210WEB

  • Page 1 User's Guide TL-SG2109WEB 9-Port Gigabit Web Smart Switch TL-SL2210WEB 8-Port 10/100Mbps + 2-Port Gigabit Web Smart Switch TL-SL2218WEB 16-Port 10/100Mbps + 2-Port Gigabit Web Smart Switch TL- SL2428WEB 24-Port 10/100Mbps + 4-Port Gigabit Web Smart Switch TL-SL2452WEB 48-Port 10/100Mbps + 4-Port Gigabit Web Smart Switch Rev: 1.0.3...

  • Page 2: Fcc Statement

    TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2010 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

  • Page 3: Safety Notices

    Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. EC DECLARATION OF CONFORMITY (EUROPE1 In compliance with the EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC, this product meets the requirements of the following standards: EN55022 ¾...

  • Page 4: Table Of Contents

    TABLE OF CONTENTS Package contents .................1 Chapter 1: Introduction ...............2 1.1 Intended Audience ..................2 1.2 Agreement ....................2 1.3 Guide Overview ..................2 Chapter 2: Device Description ............4 2.1 Introduction to the Device ...............4 2.2 Features and Technical Specifications ..........4 2.2.1 Features ....................4 2.2.2 Technical Specifications ...............5 Chapter 3: Mounting Device ...............7 3.1 Install the Device ..................7...
  • Page 5 4.1.1 System Information ................12 4.1.2 File Transfer ..................12 4.1.3 Reboot & Reset ..................12 4.1.4 User ....................13 4.2 Port Setting ...................13 4.2.1 Port Parameter ...................13 4.2.1.1 Duplex Mode ...................13 4.2.1.2 Flow Control ..................13 4.2.1.3 Port Security ...................13 4.2.2 Port Statistic and Port Status .............14 4.2.3 Storm Control ..................14 4.2.4 Port Description .................15 4.3 Network Setting ..................15...
  • Page 6 4.6.4 802.1p Priority ..................21 4.7 Port Mirroring ..................21 4.8 Virtual Cable Test ..................22 Chapter 5: WEB Management ............23 5.1 Overview ....................23 5.2 Connecting to the Device ..............23 5.2.1 Getting Started ..................23 5.2.2 Login the Switch .................27 5.3 Setting the Device .................27 5.3.1 System Setting ..................32 5.3.1.1 System Information .................32 5.3.1.2 File Transfer ...................33...
  • Page 7 5.3.3.6 Aging Time ..................49 5.3.3.7 Ping ....................50 5.3.4 VLAN Setting ..................51 5.3.4.1 VLAN Mode ..................51 5.3.4.2 Port VLAN Setting ................51 5.3.4.3 Tag VLAN Global Setting ..............53 5.3.4.4 Tag VLAN Setting ................54 5.3.4.5 MTU VLAN Setting .................56 5.3.5 Port Trunking ..................56 5.3.6 Priority Setting ..................57 5.3.6.1 Priority Mode ...................58 5.3.6.2 Port-Based Priority ................58...

  • Page 8: Package Contents

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Package contents The following contents should be found in your box: One Web Smart Switch ¾ One AC power cord ¾ User Guide ¾ Two mounting brackets and other fittings ¾ Note: If any of the listed contents are damaged or missing, please contact the retailer from whom you purchased the TL-SG2109WEB/TL-SL2210WEB/TL- SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Gigabit Web Smart Switch for assistance.

  • Page 9: Chapter 1: Introduction

    Smart Switch. 1.3 Guide Overview This user guide is divided into the following sections to provide concise information for configuring, and managing the TP-Link device: Section 1: Introduction. Section 2: Device Description -- Provides an overview about the switch family.
  • Page 10 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Section 5: WEB Management -- Give an explanation to the terms in WEB interface and describes the configuring suggestions of the switch. Appendix A: Pin Explain For RJ-45 Connector Appendix B: Table of Factory Defaults Appendix C: Table of Function Differences of Switch Family...

  • Page 11: Chapter 2: Device Description

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Chapter 2: Device Description 2.1 Introduction to the Device TheTL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/ TL-SL2452WEB Gigabit Web Smart Switch is compliant with the IEEE802.3 Ethernet protocols. The EIA-standardized framework and smart configuration capacity can provide flexible solutions for variable scale of networks. This switch family is equipped with powerful management interface, via which system, port, network, VLAN, truck and priority can be configured.

  • Page 12: Technical Specifications

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Support N-Way adaptive mode ¾ Support up 200 meters of Cat. 5 cables at the transmission speed of 10M ¾ Support MAC address table of 8K entries ¾ Support MAC address learning and aging time ¾...
  • Page 13 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 10Base-T: UTP/STP of Cat. 3 or above Transmission 100Base-TX: UTP/STP of Cat. 5 Medium 1000Base-X: MMF or SMF SFP Module (OPTIONAL1 Power Indicates whether power is supplied or not 10/100Mbps RJ-45 port: Link/Act LED and 10/100Mbps LED Port 10/100/ 1000Mbps RJ-45 port: Link/Act and 10/100/1000Mbps LED SFP port: 1000Mbps Link/Act LED...

  • Page 14: Chapter 3: Mounting Device

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Chapter 3: Mounting Device 3.1 Install the Device Installation Precautions: 1. Ensure the surface on which the device is placed is adequately secured to prevent it from becoming unstable and/or falling over. 2. Ensure the power outlet is placed within 1.5 m (5 feet1 of the device. 3.

  • Page 15: Ac Power

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 2. Insert the switch into the rack. 3. Fix the switch to the rack with the rack screws (not provided1. 3.1.3 AC Power The switch can be used with AC power supply 100 to 240V AC,50 to 60Hz. The switch’s power supply will adjust to the local power source automatically.
  • Page 16 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB LEDS ¾ 11 LEDs lie at the left side of the panel (1000Mbps Link/Act LED of the SFP lie at right side of the SFP1. 21 Power LED: solid red when power is supplied to the switch and is operating normally.

  • Page 17: Back Panel

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB GIGA1 Power 21 23 GIGA1 SFP 1 SFP 2 SFP 1 TL-SL2428WEB Link GIGA2 Reset System 24+4G Gigabit Web-Smart Switch 100M 1000M SFP 2 GIGA2 Figure 3-5 TL-SL2428WEB Front Panel GIGA1 GIGA2 GIGA1 TL-SL2452WEB 48+4G Gigabit Web-Smart Switch Power...

  • Page 18: Note

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB SFP module support hot-plugging, plug the SFP module into the SFP port and the switch can identify it automatically. 3.3 Note The surface on which the switch is placed should be adequately secured ¾...

  • Page 19: Chapter 4: Function Description

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Chapter 4: Function Description This section presents the network concepts referred in switch function description. 4.1 System Setting System setting contains the following topics: displaying and configuring the switch information, upgrading firmware, backing up and loading configuration, rebooting and soft-resetting, configuring username and password.

  • Page 20: User

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 4.1.4 User The username and password can be modified in order to exclude illegal users. 4.2 Port Setting 4.2.1 Port Parameter 4.2.1.1 Duplex Mode Ports have the duplex modes: 10M HD, 10M FD, 100M HD, 100M FD and 1000M FD (Giga port support1.

  • Page 21: Port Statistic And Port Status

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB If the port security is enabled, it will not learn new MAC address and only transmit the frames from the MAC address list in the port’s static MAC address table. 4.2.2 Port Statistic and Port Status Port Statistic calculates the statistics of each port, such as how many frames, error frames, broadcast frames it has received, and so on.

  • Page 22: Port Description

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 4.2.4 Port Description Use a description word to indicate the port. 4.3 Network Setting The network module provides the function of setting switch IP address, dynamic binding and aging time, configuring static MAC address and filtering MAC address, displaying dynamic bound address and ping.

  • Page 23: Aging Time And Dynamic Address Table

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Notice: If no DHCP server is present in the network, the DHCP client fails to get IP configuration information, the switch then restores the IP parameters to default in several minutes to ensure a valid IP address being equipped. 4.3.2 Aging Time and Dynamic Address Table A dynamic MAC address table is maintained inside the switch.

  • Page 24: Filtering Mac Address Table

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Supposing an entry, whose MAC address is 000AEB000001 and corresponding port number is 1, it is added to the static MAC address table. All the packets routing to the address of 000AEB000001 egress for the switch port 1.

  • Page 25: Ping

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB binding MAC addresses1 in static state. This enhances the efficiency of packets forwarding and limits the connecting device number of the switch port. Reboot the switch after configuring the dynamic binding function. The switch will acknowledge and bind the latest connecting devices.

  • Page 26: Vlan Mode

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB traffic is generated. 4.4.1 VLAN Mode There are 3 types of VLAN mode support in the switch: 1) Port VLAN VLANs are divided basic on ports. 2) IEEE802.1Q Tag VLAN The IEEE802.1Q protocol define a new format of the frame, it add a tag header in the original Ethernet frame, as follow: Figure 4-1.

  • Page 27: Port Trunking

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB can communicate with any other ports but other ports can’t communicate with each other. 4.5 Port Trunking Trunk is Link Aggregation. It optimizes port usage by linking a group of ports together to form a single trunk (aggregated groups1.Bandwidth of the Trunk is the sum of bandwidth of its member port.

  • Page 28: Port-Based Priority

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB configured as "weighted", a 1,2,4,8 weighting is applied to forward packets. When "fixed" is selected, all packets with top priority egress for a switch port until that priority's queue is empty, then the packets with next lower priority. 4.6.2 Port-Based Priority Four priority classes (lowest, lower, higher and highest1 are available for a switch port in port-based priority mode.

  • Page 29: Virtual Cable Test

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 4.8 Virtual Cable Test The virtual cable test feature uses Time Domain Reflectometry (TDR) to test the quality of the cables connected to the port. Some of the possible problems than can be diagnosed include opens, shorts, cable impedance mismatch, bad connectors, termination mismatch, and bad magnetics.

  • Page 30: Chapter 5: Web Management

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Chapter 5: WEB Management 5.1 Overview The Web-Smart switch is managed via WEB pages. The smart and friendly interfaces make the switch management an easy job. 5.2 Connecting to the Device 5.2.1 Getting Started Before connecting to the WEB server (switch1, the installation of WEB browser, which supports JavaScript, must be completed in the computer.
  • Page 31 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Figure 5-1 Internet Options Dialog Secondly, click the “Settings” button hinted in figure 5-1, a new dialog will display: Figure 5-2 Settings Dialog...
  • Page 32 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB In the case of IE5.0, please check the option “Every visit to the page”; otherwise, some wrong information may display in WEB pages. If the IE version is 6.0, “Every visit to the page” or “Automatically” are both appropriate.
  • Page 33 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Figure 5-4 Security Settings Fourthly, Select the “Medium” option of the combo box indicated in figure 5-4, click the “Reset” button, and click “OK” to quit. Fifthly, right-click the mouse on desktop, select the “Display Properties” in the popup menu, a new dialog will display: Figure 5-5 Resolution Settings...

  • Page 34: Login The Switch

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Click the “Settings” label, set the screen resolution to 1024 x 768 and click “OK”. All the necessary IE configuration is completed. 5.2.2 Login the Switch Supposing the switch IP address is set as 192.168.0.1, open a web browser and enter http://192.168.0.1 in the address location, and then the following dialog page appears: Figure 5-6 Login Dialog...
  • Page 35 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Figure 5-7 TL-SL2210WEB Main Page 11 The main part of the page is the main window to display the configuration page. 21 The Port Led Indicator table lies at the top of the page. It provides a visual representation of the ports on the switch front panel to display the status of the ports.
  • Page 36 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Click on the icon of the port to open a new window, which shows the status details of the port, as shown below: Figure 5-10a Port Status Table Figure 5-10b SFP Status Table (uninstalled1 Figure 5-10c SFP Status Table (installed1...
  • Page 37 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 31 On the left side of the page is the menu table. It contains 8 main menus. Each menu has some submenu. Click on a menu, it will open its submenu and the main window display the configuration page of the submenu list first, click on the submenu you want to configure to open the corresponding configuration page.
  • Page 38 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB The following shows main page of the TL-SG2109WEB, TL-SL2218WEB, TL-SL2428WEB and TL-SL2452WEB: Figure 5-12 TL-SG2109WEB Main Page Figure 5-13 TL-SL2218WEB Main Page...

  • Page 39: System Setting

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Figure 5-14 TL-SL2428WEB Main Page Figure 5-15 TL-SL2452WEB Main Page 5.3.1 System Setting System setting contains four topics: system information, file transfer, reboot & reset and user. 5.3.1.1 System Information...

  • Page 40: File Transfer

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB This page contains the following fields: Figure 5-16 System Information Software Version : Displays the installed software version number. ¾ Hardware Version : Displays the installed device hardware version ¾ number. System Description : Displays the device model number and name.

  • Page 41: Reboot & Reset

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Transfer Type : Lists three types of file transfer supported by the switch. ¾ File Name : Identifies the file to be loaded or to be backed up on TFTP ¾ server. TFTP Server IP : Indicates the IP address of TFTP server.

  • Page 42: User

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB A prompt will display if a button is pressed. For example, if the button “Soft- reset” is pressed, a message box will be activated as showed in figure 5-19. Figure 5-19 Message Box 5.3.1.4 User This page provides the interface of configuring username and password.

  • Page 43: Port Setting

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 5.3.2 Port Setting 5.3.2.1 Port Parameter This page contains the following fields: Figure 5-21 Port Parameter Port Status : Indicates whether the port is operational or non-operational.” ¾ Enable" Indicates the port is operational and "Disable" Indicates the port is non-operational.

  • Page 44: Port Statistic

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Notice: If you haven’t set the static MAC address, you can't enable all of the port security, which will result in an inability to manage the switch. Flow Control : Indicates whether the flow control is enabled or disabled. ¾...
  • Page 45 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Tx Collisions : The number of collision events seen by the MAC. This ¾ counter is applicable in half-duplex only. Tx Ucast : The number of frames sent that have a unicast destination MAC ¾...

  • Page 46: Port Status

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 127 octets inclusive, including those with errors. RX 128 to 255 B : Total frames received with a length of between 128 and ¾ 255 octets inclusive, including those with errors. RX 256 to 511 B : Total frames received with a length of between 256 and ¾...

  • Page 47: Storm Control

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Port Status : Indicates whether the port is linked, not linked, or disabled. ¾ Speed (Mbps) : Indicates the port speed with the unit of Mbps. ¾ Duplex Mode : Indicates the port duplex mode. ¾...

  • Page 48: Port Description

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Limit Rate : Indicates the maximum rate (kilobytes per second1 at which ¾ the controlled packets configured above are forwarded. For the 1000M port, if set the value of 64K, the actual value is about 70Kbps. Notice: Parameters of Trunk member ports display the parameters of the Trunk they belong to and cannot be configured here (see port 5 and 6 in the figure for...

  • Page 49: Switch Ip Address

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 5.3.3.1 Switch IP Address This page is showed as below: Figure 5-26 Switch IP Address MAC Address : Is firmed into switch in the manufacturing process; it is ¾ sole and unchangeable. DHCP Client : Indicates whether the DHCP function is enabled.

  • Page 50: Static Mac Address

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 5.3.3.2 Static MAC Address This page provides the function of adding, searching a static MAC address and changing the entry state, as shown in figure 5-27. Figure 5-27 Static MAC address A MAC address and its corresponding switch port should be provided when adding a static MAC address entry.
  • Page 51 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB If the static MAC address doesn’t be found in a searching, then the following page will display: Figure 5-29 A Failed Searching : Input the MAC address in “MAC Address” field and select a port ¾...

  • Page 52: Filtering Mac Address

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB address entry1, all the packets routing to the device cannot reach the device. 4) A MAC address cannot be added to static MAC address table and filtering MAC address table simultaneously. 5.3.3.3 Filtering MAC Address All the packets taking the filtering MAC address as their destination are discarded by the switch no matter which port they enter from.

  • Page 53: Dynamic Binding

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 5.3.3.4 Dynamic Binding This page provides the function of enabling or disabling dynamic binding. If dynamic binding is disabled, the switch port learns MAC address unlimitedly (at most 8000 entries can be learned1. A switch port with dynamic binding enabled can bind a specified number of MAC address.
  • Page 54 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Port : Indicates switch port number. ¾ Binding : Three options are available. A further explanation is stated below. ¾ Number of MAC Address to Bind : Indicates the max number of MAC ¾...

  • Page 55: Bound Mac Address

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 51 --: The port is a trunk member and its binding function cannot be configured. Further Explanation 1) If the port is set to secure port manually in "Port Parameter " page, the dynamic binding cannot be configured here.

  • Page 56: Aging Time

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB MAC Address : Indicates MAC addresses already bound to the switch ¾ ports. Port : Indicates the switch port number corresponding to the bound MAC ¾ address. Further Explanation 11 The bound MAC address table contains all the MAC addresses bound by the switch ports.

  • Page 57: Ping

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB "aging time". Further Explanation 11 The aging time ranges from 0 to 3825 seconds. An appropriate aging time should be configured here. An aging time that is too long lengthens the time of the dynamic MAC address being deleted and further causes the packets to be forwarded incorrectly.

  • Page 58: Vlan Setting

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 5.3.4 VLAN Setting 5.3.4.1 VLAN Mode This page selects the VLAN Mode, possible field values are: Figure 5-35 VLAN Mode VLAN Disable : Do not set any VLAN in the switch, all ports of the switch ¾...
  • Page 59 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB VLAN : The VLAN number. Select the number of the VLAN you want to ¾ configure here. Port : The switch port number. ¾ Member : Select the member of the VLAN here. If this field is checked, it ¾...

  • Page 60: Tag Vlan Global Setting

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB other. 61 The number of Port VLAN can be set is the same as the switch port number. 5.3.4.3 Tag VLAN Global Setting This page display when the switch is in Tag VLAN mode, the global setting of the ports will affect all Tag VLANs.

  • Page 61: Tag Vlan Setting

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 5.3.4.4 Tag VLAN Setting This page is displayed when the switch is in Tag VLAN mode, it configures each VLAN and is affected by the global setting of the ports, it contains the following fields: Figure 5-39 Tag VLAN Setting VLAN...
  • Page 62 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB All Ports : By operating on this field expediently, you can set the values of ¾ all ports in the corresponding field. All VLAN : Display all defined Tag VLANs. ¾ Figure 5-40 All Tag VLAN Select All : Select all ports to be the VLAN member.

  • Page 63: Mtu Vlan Setting

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 71 The number of Port VLAN that can be set depends on the switch type. See the Appendix C for details. 5.3.4.5 MTU VLAN Setting This page, which is designed to configure the uplink port, displays when the switch is in MTU VLAN mode.

  • Page 64: Priority Setting

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Trunk : The Trunk number. ¾ Member : Select the member of the Trunk here. Each group has 4 optional ¾ ports to compose a Trunk. Storm Control : configure the storm control for the Trunk here. All member ¾...

  • Page 65: Priority Mode

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Figure 5-43 Priority Mode Priority Mode : Contains “Disable”, “Port-Based” and “IEEE802.1p”. ¾ Priority Rule : Contains “Weighted” and “Fixed”. If the priority mode is set ¾ to “Disable”, the priority rule cannot be configured. 5.3.6.2 Port-Based Priority This page is revealed when the “Port-Based”...

  • Page 66: Port Default Priority

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Further Explanation When priority rule is configured as "weighted", a 1,2,4,8 weighting is applied to forward these four classes of packets. 5.3.6.3 Port Default Priority This page is revealed when the “IEEE802.1p” mode is configured. When a switch port receives an untagged frame (a frame without priority tag1, the port's default priority tag will be inserted into the frame before any other process.

  • Page 67: Port Mirroring

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Figure 5-46 802.1p Priority Priority Tag : The priority tag defined in IEEE802.1p. ¾ Corresponding Priority Class : Indicates the inner priority classes of ¾ switch. The tagged frames are classified into four classes inside the switch: lowest, lower, higher and highest.

  • Page 68: Virtual Cable Test

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Mirror Mode : You can set the mirror mode to monitor the ingress traffic, ¾ egress traffic, or both. You can also disable port mirroring. Mirror Port : Defines the port to monitor the traffic, Trunk member can't be ¾...
  • Page 69 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Test Port : Select the port you want to test. ¾ Link Status : Reports good status or issues such as cable opens, cable ¾ shorts or any impedance mismatch in the cable. Link Length : Reports the range of the cable length if the link status is ¾...

  • Page 70: Appendix A Pin Explain For Rj-45 Connector

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Appendix A Pin Explain For RJ-45 Connector The switching port can connect to stations wired in standard RJ-45 Ethernet station mode using straight cables. Transmission devices connected to each other use crossed cables. The following figure illustrates the pin allocation: Figure RJ-45 connector The following shows the way to make the cable use to connect switch to network adapter, and cable use to connect switch to switch/hub/bridge.
  • Page 71 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB 1 TX+ RX+ 1 2 TX- 3 RX+ TX+ 3 6 RX- MDI-II MDI-X Figure straight cable Crossed cable: use to connect switch (normal port1 to switch/hub/other device(normal port1. 1 RX+ RX+ 1 2 RX- 3 TX+ TX+ 3...

  • Page 72: Appendix B Table Of Factory Defaults

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Appendix B Table of Factory Defaults Table of Factory Defaults: System Name Null System Information System Location Null Contact Information Null System Setting Transfer Type System Upgrading File Transfer File Name SysSL2210WEB.bin User Name supervisor User Password...
  • Page 73 Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Aging Time Aging Time Destination IP Address 192.168.0.1 Network Setting Ping Count Ping Data Size Ping Interval 1000 VLAN Mode Disable Port VLAN Setting All ports belong to VLAN 1 Tag VLAN PVID VLAN Setting Untag Frame Pass...

  • Page 74: Appendix C Table Of Function Differences Of Switch Family

    Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB Appendix C Table of Function Differences of Switch Family Table of Function Differences of Switch Family Models Function TL-SG2109WEB TL-SL2210WEB TL-SL2218WEB TL-SL2428WEB TL-SL2452WEB Port Giga Port SFP Port Trunk Port VLAN Tag VLAN Static MAC Filtering MAC Dynamic...
  • Page 75 TP-LINK TECHNOLOGIES CO., LTD. http://www.tp-link.com...

This manual is also suitable for:

Tl-sg2109webTl-sl2218webTl- sl2428webTl-sl2452webTl-sl2428web

Table of Contents