Table of Contents
Advertisement
Configuring Client Settings
Configuring Client Settings with ViewSonic Client Setup
2. Click on the icon of the desired setting.
3. Click Add to add up an entry for that setting if necessary.
4. On the detailed setting page(s), choose or type in the desired setting values.
NOTE
• Click on the gray lock
gray lock will become orange
and secured, the corresponding setting value is locked on the client and cannot be
changed locally through ViewSonic Client Setup.
• If the lock icon of a setting value is blue
group configuration (profile). You can only change the value by modifying/
removing the group configuration (profile) or applying a new one.
• If you apply a group configuration to a client, all related settings will also be shown
in the Edit Configuration window for individual clients.
5. After the editing of setting values is completed, click Save at the bottom of that setting page to
save the changes.
6. Repeat steps 1 through 5 to edit other settings.
4.5 Configuring Client Settings with ViewSonic Client Setup
ViewSonic Client Setup allows you to configure client settings locally on clients. Additionally, some settings are only
available locally on clients and therefore can only be configured through ViewSonic Client Setup.
NOTE
• For the list of client settings only locally accessible on clients, please refer to section
"4.2 Client Settings at a Glance" on page 101.
• To have a basic understanding of client configuration, please refer to section "3.4.8
Client Settings" on page 48.
For more information on how to configure client settings locally on clients with ViewSonic Client Setup (ACS), please
refer to the user's manual or ACS user's manual for a specific thin client model.
icon located close to a setting item to lock its value. The
and secured. When a lock icon becomes orange
, this setting value comes from the
108
Advertisement
Table of Contents
