Table of Contents
Advertisement
Using ViewSonic Device Manager
Establishing a Basic Administration Environment
Deleting a Database and Certificate Archive File
To delete a database and certificate archive file, please do the following:
1. On System tab, click Backup and Restore.
2. In Database and Certificate Archive Management section, click the drop-down menu to select the desired
archive file.
3. Click Delete to remove the selected archive file.
3.2.13 Restoring a Database and Certificate Archive File
To restore a database and certificate archive file, please do the following:
1. On System tab, click Backup and Restore.
2. In Database and Certificate Archive Management section, click the Archive File drop-down menu to select
the desired archive file.
3. Click Restore to return the management database and client certificates of ViewSonic Device Manager to the
desired state.
3.2.14 Managing P2T License Files
ViewSonic P2T Converter is also one of tools developed by ViewSonic that enables you to easily convert an existing
personal computer into an ViewSonic thin client. The personal computer then runs as an ViewSonic Linux based
client and is manageable by ViewSonic Device Manager. This tool can help you extend the service life of existing
computers and reduce the cost of IT transformation.
TIP
• P2T Converter is the abbreviation of PC to TC Converter. Here TC is the acronym for
Thin Client.
To convert an existing computer into an ViewSonic thin client, you need to install P2T Converter on that computer.
For detailed instructions, please refer to the Installation Guide for P2T Converter.
NOTE
• From now on, we will refer to the computer which P2T Converter has been installed
on it as a P2T client for short.
To get your P2T client ready for use, you need to add your P2T client into a managed group under ViewSonic Device
Manager and obtain a P2T license from ViewSonic Device Manger.
32
Advertisement
Table of Contents
