ViewSonic SC-T45 User Manual page 28

7. On completion, the imported package file appears in the Package list.
Deleting WES Packages
To delete a WES package file, please do the following:
1. On System tab, click WES Package.
2. The Package list appears.
3. Click to select the desired package file, and then click Delete Package.
4. The Delete Package window appears prompting you for confirmation.
5. Click Delete to confirm.
6. The selected package file is removed from the Package list.
Scanning WES Packages
The Scan Package feature helps you to discover the local or remote WES package files. There are two scenarios that
you need the help of this feature. The first scenario is that you choose to update clients with remote package files
rather than local imported ones. In this scenario, the local list of available packages in ViewSonic Device Manager
may be not in sync with the remote list of packages on another computer where you choose to get package files.
The Scan Package feature can synchronize your local list with the remote one.
NOTE
• For instructions on how to configure your ViewSonic Device Manager to use remote
package files on another computer for client management, please refer to section
"3.2.7 Configuring Remote Deployment Settings" on page 26.
Another scenario is when you copy the file set of an imported package file from the installation directory of another
ViewSonic Device Manager into the same installation directory of your ViewSonic Device Manager, this package file
may not appear as an entry in the Package list.
NOTE
• The default installation directory of ViewSonic Device Manager is C:\Program Files
(x86)\ViewSonic. The file set of an imported package file is placed in C:\Program Files
(x86)\ViewSonic\packages, under an uppermost dedicated folder.
To synchronize entries in the Package list with the local or remote package files, please do the following:
1. On System tab, click Deployment > WES Package.
2. The Package list appears in Management area.
3. Click Scan Package on the top of the list.
4. On completion, the package file is added as an entry in the Package list.
Using ViewSonic Device Manager
Establishing a Basic Administration Environment
23