Table of Contents
Advertisement
Using ViewSonic Device Manager
Establishing a Basic Administration Environment
3.2.10 Selecting the Interface Language of ViewSonic Device Manager
To select the interface language of your ViewSonic Device Manager, please do the following:
1. On System tab, click System Settings > Language.
2. The System Language pane appears in Management area.
3. Click the drop-down list of available languages to select the desired interface language.
4. Click Save to apply.
3.2.11 Backing Up the Management Database and Client Certificates
Management Database. The database of ViewSonic Device Manager are data required for client management.
Client Certificates. With certificates for clients, your ViewSonic Device Manager are authorized to manage clients
remotely. Your client is not managed by any ViewSonic Device Manager by factory default. To manage a client,
you need to add it into a managed group under the governing ViewSonic Device Manager. Once this is done, the
governing ViewSonic Device Manager obtains a certificate to be able to manage that client.
NOTE
• Detailed instructions on how to add a client into a managed group under your
ViewSonic Device Manager will be introduced in section "3.3.3 Client Detection and
Management" on page 35.
To back up the management database and client certificates of ViewSonic Device Manager, please do the following:
1. On System tab, click Backup and Restore.
2. In Database and Certificate Backup section, type the desired file name prefix.
TIP
• The backup file is stored in the default directory as shown in Directory field. If you
want to change the name of a backup file, locate the file and change its name.
3. Click Backup to store a copy of management database and client certificates.
4. On completion, the backup file appears at the top of the Archive File drop-down menu in Database and
Certificate Archive Management section.
30
Advertisement
Table of Contents
