Table of Contents
Advertisement
To dig out the desired profile, client, or event log on a Profile, Client, Event Log list, please
do the following:
1. Open the Profile, Client, or Log List.
• On Thin Clients tab, click Profiles or Thin Clients, and then click the group to which the Profile or Client
list belongs to open the Profile or Client list.
• On ViewSonic Device Manager, click on Logs tab to open the Log list.
2. The Profile, Client or Log list appears in Management area.
3. At the bottom of the list, click the Quick Search button
4. The Quick Search bar appears.
5. Click the drop-down menu to select the desired search type and enter the desired search keyword.
6. Click Search to start searching for profiles, clients, or event logs.
7. On completion, the Result list appears above the Quick Search bar.
3.4.27 Digging Out Clients with Filters
ViewSonic Device Manager enables you to create filters for digging out clients from all managed clients. With filters,
you can access and manage a specific set of clients quickly.
NOTE
• You can also use Quick Search to dig out clients within managed clients. For details,
please refer to "3.4.26 Digging Out Profiles, Clients, or Event Logs with Quick Search"
on page 84.
Adding a Filter
To add a filter, please do the following:
1. On Thin Clients tab, right click on the Filters in Navigation area.
2. A popup menu appears.
3. Click to select Add Filter.
Using ViewSonic Device Manager
.
85
Managing All Your Clients
Advertisement
Table of Contents
