Table of Contents
Advertisement
Using ViewSonic Device Manager
Managing All Your Clients
4. The Command menu appears.
5. Click to select Partial Update.
6. The Partial Update window appears prompting you to select the software package.
7. Click the drop-down menu to select the desired software package, and then click OK to confirm.
8. On the selected client, a warning message appears to notify the user of the planned reboot and allow the
user to cancel the action if necessary.
9. After completion, the desired software package is installed on the selected client.
TIP
• To check remotely if the installation is completed, select the client, and then click
Edit to view the basic information about a client. For more details, refer to section
"3.4.17 Editing or Viewing the Basic Information about a Client" on page 68.
3.4.23 Taking Client Snapshots
A snapshot is the system backup of a client at a specific point of time, which you can use to restore your client to
that system state.
NOTE
• SC-T35 thin clients don't support the Snapshot feature.
To take a system snapshot for a client, please do the following:
1. On Thin Clients tab, click Thin Clients to expand the Client Group tree, and then click to select the client
group to which the desired client belongs.
2. The Client list appears.
80
Advertisement
Table of Contents
