Table of Contents
Advertisement
3.4.16 Pulling Client Settings through Your Local Network
The Pull Settings feature enables you to retrieve settings from a client and store in ViewSonic Device Manager,
which help you sync up the client configuration in ViewSonic Device Manager with the one set up locally on a client.
NOTE
• Some settings can only be configured locally on clients. These settings cannot be
retrieved from clients and stored in ViewSonic Device Manager. See section "3.4.8
Client Settings" on page 48 and chapter 4 "Configuring Client Settings" on page
100 for more details.
Pull Settings from a Client
To pull setting from a client, please do the following:
1. On Thin Clients tab, click Thin Clients to expand the Client Group tree, and click to select the client group to
which the desired client belongs.
2. The Client list appears.
3. Click to select the desired client, and then click Command on the top of the Client list.
NOTE
• To select more than one client, Ctrl-click to select the desired clients.
• Ensure that all selected clients are powered up. Otherwise, you may fail to pull
settings from some clients. You can remotely know the current status of a client
through the Status icon in front of the client. For information on the Status icons,
please refer to section "3.4.7 Understanding Client Status Icons" on page 47.
4. The Command menu appears.
5. Click to select Pull Settings.
Using ViewSonic Device Manager
65
Managing All Your Clients
Advertisement
Table of Contents
