Table of Contents
Advertisement
4.4 Editing or Adjusting an Individual Configuration
On ViewSonic Device Manager, you can apply an individual configuration to a client through the Edit Configuration
window for that client. Through this window, all remotely configurable settings can be edited, then you can push
settings to the client through the Push Settings feature.
NOTE
• In this section, we will focus on the editing/adjusting of an individual configuration
in greater detail. For general instructions on how to create an individual
configuration or on how to open the Edit Configuration window for a client, please
refer to section "3.4.13 Using Individualized Client Settings" on page 58.
NOTE
• To have a basic understanding of client configuration, please refer to section "3.4.8
Client Settings" on page 48.
• Please note that, although the Edit Configuration window for a profile (group
configuration) looks almost the same as the Edit Configuration window for a client
(individual configuration), their functions are different. The latter will only affect
some specific client when the configuration is applied.
To configure a setting in the Edit Configuration window (for a client), please do the following:
1. In the Edit Configuration window for a client, click the tab to which the desired setting belongs.
Edit Configuration (Thin Client) Window: SC-T45
107
Configuring Client Settings
Editing or Adjusting an Individual Configuration
Advertisement
Table of Contents
