2.1 Installing ViewSonic Device Manager
To install ViewSonic Device Manager on your computer, please follow the steps below:
NOTE
• Before proceeding, ensure that:
• To install a newer version of ViewSonic Device Manager, it's recommended
to install it directly without uninstalling the current ViewSonic Device Manager.
For more information on how to upgrade your ViewSonic Device Manager, please
refer to section "2.4 Upgrading ViewSonic Device Manager" on page 10.
1. Insert the accompanying Documentation and Utility CD / DVD into your CD / DVD drive.
2. Double click the CD / DVD drive to open the CD / DVD folder, and then click Configuration Tools to locate
the installation program for ViewSonic Device Manager.
3. Double click vdm-setup-x.yz_VSCE-ENUS.exe to launch the installation program.
4. The Setup Wizard appears.
5. Click Next to continue.
Installing and Upgrading ViewSonic Device Manager
Your operating system is supported (see section 1.3 on page 2)
Your computer meets system requirements (see section 1.5 on page 3)
Installing ViewSonic Device Manager
5