Changing The Display Language For Your Sc-T45 - ViewSonic SC-T45 User Manual

Configuring Client Settings

Changing the Display Language for your SC-T45

3.6 Changing the Display Language for your SC-T45
This section will guide you through the process of changing the display language for your SC-T45.
NOTE
• The installed version of Windows Embedded Standard 7 on your SC-T45
supports only single display language. You are not allowed to install multiple
language packs and switch between different display languages through
Control Panel.
However, you can change the default display language (English) to another
supported language if needed.
To change the display language for your SC-T45, please do the following:
1. Turn on your SC-T45.
2. The system will automatically log in to the Windows Embedded operating system using the default
standard user account.
NOTE
• There are two default user accounts for your Windows Embedded-based
system: one is the standard, the other administrative. The default credentials
are shown
as follows:
• Every time when the system is started up, it will automatically log in to the
Windows Embedded operating system using the default standard user account
as indicated above.
Type Account Name
Administrator Administrator
Standard user User
Password
Administrator
User
76