Sewing Start And End Backtack Stitches - Brother T-8422C Instruction Manual

Instruction manual - english
Hide thumbs Also See for T-8422C:
Table of Contents

Advertisement

7. USING THE G10 OPERATION PANEL (BASIC OPERATIONS)

7-2. Sewing start and end backtack stitches

2911M
1
Setting start backtack stitches
2
Setting end backtack stitches
3
4
39
Start backtacking is carried out. After it has finished, normal sewing continues for as long as
the treadle remains depressed.
NOTE:
If the treadle is returned to the neutral position, the sewing machine will continue
operating until the set number of start backtack stitches has been sewn.
End backtacking is carried out. After it has finished, the thread is trimmed automatically
(models with thread trimmer) and the sewing machine stops in the needle up position.
NOTE:
・ If the treadle is depressed backward before sewing of the set number of start backtack
stitches is complete, end backtacking will not be carried out.
・ If thread trimming lock is set, the sewing machine will stop in the needle up position
without thread trimming being carried out.
T-8421C, 8422C, 8452C, 8722C, 8752C
For example,
3 stitches and
4 stitches
4200M
Example:
4201M
2159M
2160M

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T-8722cT-8752cT-8421cT-8452c

Table of Contents