Symantec 10547829 - Mail Security For Smtp 5.0 Smb Installation Manual page 48

48 Setting up the Symantec Mail Security Appliance
Logging in and logging out
3 If necessary, choose the language in which you want to operate the Control
Center.
Below the text entry fields you will see a list of names of languages. The name
of the language currently in use is displayed in normal text. The names of
other languages are displayed underlined and highlighted. Click on the name
of another language to use that language instead.
4 In the User name box, type your user name (for example, kris).
5
In the Password box, type the password you normally use to log in to your
system.
6
Select the LDAP server you use to verify your credentials (not shown).
7
Click Login.
To log in as an end user with an Exchange 5.5 account
1
Access your Control Center from a browser.
The default login address is:
https://
<hostname>
where
<hostname>
initialization. Or, you can use the IP address in place of
You may see a security alert message.
2
If you see a security alert message, accept the self-signed certificate to
continue.
The Control Center log in page is displayed.
3
If necessary, choose the language in which you want to operate the Control
Center.
Below the text entry fields you will see a list of names of languages. The name
of the language currently in use is displayed in normal text. The names of
other languages are displayed underlined and highlighted. Click on the name
of another language to use that language instead.
4
In the User name box, type your full primary email address (for example,
kris@example.com).
5
In the Password box, type the password you normally use to log in to your
Windows system.
6
Click Login.
:41443
is the hostname you designated for your appliance during
.
<hostname>