Symantec 10547829 - Mail Security For Smtp 5.0 Smb Installation Manual page 41

To register the Scanner and specify time settings
1
On the License Registration Information panel, click Browse to find your .slf
file.
2
Select your .slf file and click Open to return to the License Registration
Information panel.
3
If your network requires a proxy to access the Internet, specify proxy
information.
4
Click Register.
If registration was successful, the License Registration page returns. If there
was an error, you will see error text at the top of the page.
If you are registering a Premium feature such as Premium Content
Compliance, register your license for the feature on each Scanner that will
be using the feature.
5
If you have another .slf file for a different feature, repeat steps 1, 2, and 4.
6
When all your .slf files are successfully registered, click Next.
7 If your software needs to be updated, the Software Update page is displayed.
On the Software Update page you can:
Click Skip to update your software later.
Click Update to update your software now. Note that if you updated your
Control Center, it's recommended that you update each Scanner.
8
On the Time Settings panel, choose a time settting for this Scanner and click
Next.
You can specify up to three NTP servers, set the time manually, or choose
not to change the time.
Continue completing the Add Scanner Wizard.
See "To specify the Scanner role"
To specify the Scanner role
1
On the Scanner Role panel, choose the role for this Scanner.
You can choose to filter inbound mail, outbound mail, both inbound and
outbound mail, and IM filtering. Depending on your choice, do the following:
If you select both inbound and outbound and you have only specified one
physical port, you will see the Create Virtual IP Address panel next. Proceed
with step 3.
Setting up the Symantec Mail Security Appliance
on page 41.
How to set up the appliance
41