Symantec 10547829 - Mail Security For Smtp 5.0 Smb Installation Manual page 46

46 Setting up the Symantec Mail Security Appliance
Logging in and logging out
Note: Do not create an account for an administrator that is identical to a user
account name. Do not create an end user account that is identical to an
administrator account name. If a naming conflict occurs, the administrator will
take precedence and the end user will be denied access to their account. In the
unlikely event that both the username and the password for an administrator and
an end user are identical, the end user will be granted access to the administrator
account.
To log in as an administrator
1
Access your Control Center from a browser.
The default login address is:
https://
<hostname>
where
<hostname>
initialization. Or, you can use the IP address in place of
You may see a security alert message.
2
If you see a security alert message, accept the self-signed certificate to
continue.
The Control Center log in page is displayed.
3
You may choose the language in which you want to operate the Quarantine
and end user views of the Control Center.
Below the text entry fields you will see a list of languages. The language
currently in use is displayed in normal text. The other languages are displayed
underlined and highlighted. Click on another language to use that language
instead.
4
In the User name box, type the user name given to you by your system
administrator.
If you are the first administrator to use this appliance, type: admin
5
In the Password box, type your administrative password.
Contact your system administrator if you do not know the password.
6
Click Login.
To log in as an end user with an iPlanet or Sun ONE Directory Server
Note: To do this, LDAP authentication must be enabled.
:41443
is the hostname you designated for your appliance during
.
<hostname>