Tcp/Ip Configuration; Lan-To-Lan Application - NETGEAR RH348 Reference Manual

Chapter 7

TCP/IP Configuration

This chapter describes how to configure your Model RT328/RH348 router for TCP/IP. Depending
on your particular applications, you must configure different menus. For instance, Internet access
is the most common application of TCP/IP. For this application, you should configure Menu 4.
Configurations for other applications are provided in the following sections.

LAN-to-LAN Application

An example of a typical LAN-to-LAN application is to use the router to call from a branch office
to the headquarters, as shown in Figure 7-1.
Corporate
Branch office headquarters
Model RT328 Model RT328
router router
7788EA
Figure 7-1. LAN-to-LAN Application
For the branch office, you must configure a remote node in order to dial out to the headquarters.
Additionally, you may also need to configure static routes if some services reside beyond the
immediate remote LAN.
TCP/IP Configuration 7-1