NETGEAR RH348 Reference Manual page 64

Reference Guide for the Model RT328 and Model RH348 ISDN Routers
Table 5-1. Menu 11.1 Remote Node Profile Fields
Field
Rem Node Name
Active
Call Direction
Incoming:
Rem Login
Name
Rem Password
Rem CLID
Call Back
Outgoing:
My Login Name
My Password
Authen
5-2
Description
This field is required. Enter a descriptive name for the remote node (for example,
MyOffice). This field supports up to eight characters. This name must be unique
from any other remote node name or remote dial-in user name.
Press the space bar to toggle between Yes and No. When a remote node is
deactivated, it has no effect on the operation of the router, even though it is still kept
in the database and can be activated in the future. Deactivated nodes are displayed
with a minus sign (-) preceding the name in Menu 11.
If this parameter is set to Both, the router can place and receive calls to and from
this remote node. If set to Incoming, the router does not place a call to this remote
node. If set to Outgoing, the router will drop any call from this remote node.
Several other fields in this menu depend on this parameter. For example, in order
to enable Call Back, the Call Direction must be Both.
Enter the login name that this remote node will use when it calls into the router.
Enter the password used when this remote node calls into the router.
This field is active only if Call Direction is either Both or Incoming. Otherwise, N/A
appears in the field. This is the Calling Line ID (the telephone number of the calling
party) of this remote node. If you enable the CLID Authen field in Menu 13 - Default
Dial In, the router checks this number against the CLID in the incoming call. If they
do not match and the CLID Authen is Required, the router rejects the call.
This field is valid only if Call Direction is Both. Otherwise, N/A appears in the field.
This field determines whether or not you want the router to call back after receiving
a call from this remote node. If this option is enabled, the router disconnects the
initial call from this node and calls the node back at the Outgoing Primary Phone
Number.
This is a required field if Call Direction is either Both or Out. Enter the login name
your router uses when it calls this remote node.
This is a required field if Call Direction is either Both or Out. Enter the password
your router uses when it calls this remote node.
This field sets the authentication protocol used for outgoing calls. Options for this
field are:
• CHAP/PAP—Router will try CHAP when CHAP is requested by the remote node
or PAP when PAP is requested by the remote node (Default).
• PAP—Use PAP only.
• CHAP—Use CHAP only.
Remote Node Configuration