Table 6-1. Fields In Menu 13 - Default Dial-In Setup - NETGEAR RH348 Reference Manual

Isdn routers
Hide thumbs Also See for RH348:
Table of Contents

Advertisement

Table 6-1.
Fields in Menu 13 - Default Dial-in Setup (continued)
Field
Multiple Link Options:
Max Trans Rate
Callback Budget Management:
Allocated Budget (min)
Period (hr)
IP Address Supplied By:
Dial-in User
IP Pool
Dial-In Configuration
Reference Guide for the Model RT328 and Model RH348 ISDN Routers
Description
Enter the maximum data transfer rate between your router and the remote
dial-in user in this field. The unit is in Kbps. The two options for this field
are:
• 64—At most, one B channel is used.
• 128—A maximum of two channels can be used (default).
When the router calls back to the remote dial-in user, the maximum data
transfer rate is always 64.
This field sets a budget callback time for all the remote dial-in users.
The default for this field is 0 for no budget control.
This field sets the time interval to reset the above callback budget control.
If this field is set to Yes, the router allows a remote host to specify its own
IP address. If this field is set to No, the remote host uses the IP address
assigned by the router from the IP pool. The default is Yes.
If this field is set to Yes, the router provides the remote host with an IP
address from the pool. This field is required if Dial-In IP Address Supplied
By: Dial-in User is set to No. You can configure this field even if Dial-in
User is set to Yes, in which case the router accepts the IP address if the
remote peer specifies one; otherwise, an IP address is assigned from the
pool. The default is No. Choose from the following options to set the IP
address and the IP count:
• IP Start Addr—This field is active only if you selected Yes in the Dial-In
IP Address Supplied By: IP Pool field. The IP pool contains contiguous
IP addresses, and this field specifies the first one in the pool.
• IP Count (1,2)—In this field, enter the number (1 or 2) of the addresses
in the IP pool. For example, if the starting address is 192.168.135.5 and
the count is 2, then the pool has 192.168.135.5 and 192.168.135.6.
6-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rt328

Table of Contents