Dhcp Configuration Of Tcp/Ip In Windows Xp, 2000, Or Nt4; Dhcp Configuration Of Tcp/Ip In Windows Xp - NETGEAR WGT624v1 - 108 Mbps Wireless Firewall Router Reference Manual
108 mbps wireless firewall router
Hide thumbs
Also See for WGT624v1 - 108 Mbps Wireless Firewall Router:
- Specification sheet (2 pages)
Table of Contents
Advertisement
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624
DHCP Configuration of TCP/IP in Windows XP, 2000, or NT4
You will find there are many similarities in the procedures for different Windows systems when
using DHCP to configure TCP/IP.
The following steps will walk you through the configuration process for each of these versions of
Windows.
DHCP Configuration of TCP/IP in Windows XP
Locate your Network Neighborhood icon.
•
Select Control Panel from the Windows XP new Start Menu.
•
Select the Network Connections icon on the Control Panel. This will take you to the next
step.
• Now the Network Connection window
displays.
The Connections List that shows all the
network connections set up on the PC,
located to the right of the window.
• Right-click on the Connection you will
use and choose Status.
C-8
M-10153-01
Preparing Your Network
Advertisement
Table of Contents
Troubleshooting
