Powering On The Router; Figure 3-1. Start-Up Display - NETGEAR RH348 Reference Manual

Reference Guide for the Model RT328 and Model RH348 ISDN Routers

Powering on the Router

When you turn power on to the router, several internal tests are performed by the router and
your ISDN line is initialized. After the initialization, the start-up display appears, as illustrated in
Figure 3-1.
RAS Version: V1.3 (N.01) | 6/11/97
ethernet address: 00:a0:c5:e0:00:00
Resetting ISDN firmware. Switch Type is DSS1 - ISDN Firmware Version: V 056
Press ENTER to continue...
Figure 3-1. Start-up Display
To continue:
Press [Enter] when prompted.
1.
A login screen is displayed and prompts you to enter a password.
Enter the default password 1234 to reach the main menu of the Manager.
2.
Once you are in the Manager and if there is no activity for longer than 5 minutes, the router
automatically logs you out and displays a blank screen. If you see a blank screen, press [Enter]
to display the password screen again.
3-2 Router Configuration