Dss1 Isdn Menu; Figure 3-4. Menu 2 - Isdn Setup For North America - NETGEAR RH348 Reference Manual

Reference Guide for the Model RT328 and Model RH348 ISDN Routers
Figure 3-4 shows Menu 2 - ISDN Setup for North America.
Figure 3-4. Menu 2 - ISDN Setup for North America

DSS1 ISDN Menu

Use the commands described in
DSS1. When you finish entering the information for all the fields, do the following on both menus:
• Press [Enter] at the Press ENTER to Confirm prompt to save your selections.
or
• Press [Esc] to cancel.
When you press [Enter], the router uses the information that you enter to initialize the ISDN
link to the telephone company switch.
The router asks if you want to test whether or not your ISDN line has been successfully
connected to your router. When you select Yes, the router performs a loopback test to check
the ISDN line. If the loopback test fails, note the error message that you receive and take the
appropriate troubleshooting action. Refer to
3-8
Table 3-1 and Table 3-2
Chapter 10
to display Menu 2 - ISDN Setup for
for troubleshooting information.
Router Configuration