Provisioning For Switches In North America; Provisioning For At&T 5Ess Switch - NETGEAR RH348 Reference Manual

Reference Guide for the Model RT328 and Model RH348 ISDN Routers
Table B-1 summarizes the different switch types supported by your router and the related
information about the switch types (number of phone numbers and SPID numbers). The
information in this table refers to a "common" case and is recommended for such a case. However,
exceptions still exist to these figures. You can locate the provisioning information for the
appropriate North American switch type in the next sections.
Table B-1. Switch Types Supported
Switch Type
AT&T 5ESS NI-1
AT&T 5ESS Point to Point
AT&T 5ESS Multipoint
Northern Telecom NI-1
Northern Telecom Custom
DSS1

Provisioning for Switches in North America

For North America, the Model RT328/RH348 router has been approved by Bellcore and has the
IOC (ISDN Ordering Code) "S" Capability, EZ-ISDN1. Ordering your ISDN line in this
configuration provides basic data and voice service. If you wish to use any advanced calling
features such as call waiting, you need to order a higher level of service such as IOC "U." In
particular, you need to have ACO (Additional Call Offering) provisioned in order to use call
waiting or incoming call bumping. If your telephone company is not familiar with the IOC
ordering codes, ask them what type of switch you will be connected to and whether it is
provisioned for National ISDN or a custom protocol. Use the information under each switch to
order your ISDN line.
Provisioning for AT&T 5ESS Switch
The AT&T 5ESS switch supports three types of ISDN service: National ISDN-1 (NI-1),
Multipoint, and Point-to-Point.
Table B-2 lists the provisioning features and settings for National ISDN-1 services when using the
AT&T 5ESS switch.
B-2
Region No. of Phone #s
North America 2
North America 1
North America 2
North America 2
North America 2
Europe, Asia 2
No. of SPIDs
2
0
2
2
2
N/A
Ordering ISDN Lines