Rear Panel Leds And Buttons - HP StorageWorks 600 - Modular Disk System User Manual

Item
22

Rear panel LEDs and buttons

Item Description
1
Power On/Standby
button and system power
LED
2 Internal Health LED
3 GSI LED
4 UID button/LED (Drawer
2)
5 Power supply LED
Description
Power supply 2
Status
Green = On
Amber = Standby (auxiliary power
present)
Off = Off
Green = System health is good.
Off = System is off.
Amber = Enclosure requires service
check: I/O, fan and power supply
LEDs, and AC power cables to power
supplies.
Off = Enclosure is functioning
normally.
Blue = UID LED is enabled from the
UID button.
Blue flashing = System is in hard drive
locate mode or an enclosure firmware
update is in progress.
Off = UID LED is disabled.
Green = Power on and power supply
functioning properly
Off = One or more of the following
conditions exists:
•
System powered off
•
AC power unavailable
•
Power supply failed
Component identification 9