Device Bay Id Numbers - HP StorageWorks 600 - Modular Disk System User Manual

Item Description
6 System fan LED
7 I/O module LED
8 7-segment display
9 UID button/LED (Drawer
1)

Device bay ID numbers

Status
•
Power supply exceeded current
limit
Green = Normal operation
Amber flashing = Fault
Off = Fan unseated from connector or
failed
Green = System activity
Amber = Fault
Off = Enclosure is powered off.
1 = SES overall warning
2 = Temperature sensor warning
3 = System fan warning
4 = Power supply warning
5 = Host GSI enabled
6 = I/O Pic upgrade needed
7 = Power supply Pic upgrade needed
8 = CPLD upgrade needed
9 = Standby heartbeat failure
10 = Remote I/O module heartbeat
failure
Blue = UID LED is enabled from the
UID button.
Blue flashing = System is in hard drive
locate mode or an enclosure firmware
update is in progress.
Off = UID LED is disabled.
Component identification 10