Failure Of Another Drive During Rebuild - HP StorageWorks 600 - Modular Disk System User Manual

CAUTION:
glows, or if other drive LEDs in the array go out, the replacement drive has failed and is
producing unrecoverable disk errors. Remove and replace the failed replacement drive.
When automatic data recovery has finished, the Online LED of the replacement drive stops flashing and
begins to glow steadily.

Failure of another drive during rebuild

If a non-correctable read error occurs on another physical drive in the array during the rebuild process,
the Online LED of the replacement drive stops blinking and the rebuild abnormally terminates.
If this situation occurs, reboot the server. The system may temporarily become operational long enough to
allow recovery of unsaved data. In any case, locate the faulty drive, replace it, and restore data from
backup.
If the Online LED of the replacement drive stops blinking and the amber Fault LED
Troubleshooting 32