Remove the full-length expansion board retainer.
5.
Installing the full-length expansion board retainer
Power down the server (on page 23).
1.
Remove the access panel
2.
Remove the air baffle
3.
Open the PCI slot cover retainer latch.
4.
Install the full-length expansion board retainer, and then close the PCIe slot cover retainer latch.
5.
Install the access panel
6.
Power up the server.
7.
Removing an expansion slot cover
("Removing the access
("Removing the air
baffle" on page 26).
("Installing the access
panel" on page 24).
panel" on page 24).
Removal and replacement procedures 44