Connecting to the network
To connect the HP BladeSystem to a network, each enclosure must be configured with network
interconnect devices to manage signals between the server blades and the external network.
Two types of interconnect modules are available for HP BladeSystem c-Class enclosures: Pass-thru modules
and switch modules. For more information about interconnect module options, see the HP website
(http://www.hp.com/go/bladesystem/interconnects).
Installing a server blade
CAUTION:
unless all bays are populated with a component or a blank.
Remove the device bay blank.
1.
Remove the enclosure connector cover.
2.
To prevent improper cooling and thermal damage, do not operate the enclosure
Setup 17