•
HP BladeSystem c3000 Enclosure
To support network connections for specific signals, install an interconnect module in the bay corresponding
to the embedded adapter or mezzanine signals.
Server blade signal
FlexFabric adapter 1
(Embedded)
FlexFabric adapter 2
(Embedded)
FlexFabric adapter 3
(Embedded)
FlexFabric adapter 4
(Embedded)
Mezzanine 1
Mezzanine 2
Mezzanine 3
* Dual port mezzanine card ports and four-port mezzanine card ports 1 and 2
** Four-port mezzanine card ports 3 and 4
For detailed port mapping information, see the HP BladeSystem enclosure installation poster or the
HP BladeSystem enclosure setup and installation guide on the HP website
(http://www.hp.com/go/bladesystem/documentation).
Connecting to the network
To connect the HP BladeSystem to a network, each enclosure must be configured with network interconnect
devices to manage signals between the server blades and the external network.
c7000 interconnect bay
1
2
1
2
3 and 4
5 and 6*
7 and 8**
5 and 6**
7 and 8*
c3000 interconnect bay
1
1
1
1
2
3 and 4
3 and 4
3 and 4
3 and 4
Interconnect bay labels
Setup 27