Table 27. Mixed Pata-Sata Configuration With Only Primary Pata; Table 28. Bios Setup, Ide Device Configuration Sub-Menu Selections - Intel SE7525RP2 Technical Manual

Intel® Server Board SE7320EP2 / Intel® Server Board SE7525RP2 TPS
BIOS

Table 27. Mixed PATA-SATA Configuration with only Primary PATA

Feature
Mixed PATA / SATA
First ATA
PATA M-S
Channel
SATA M-S
Second ATA
PATA M-S
Channel
SATA M-S
rd
3rd & 4th ATA
A1-3
Channels
th
A1-4
None

Table 28. BIOS Setup, IDE Device Configuration Sub-menu Selections

Feature
Primary/Secondary/Third/Fourth IDE Master/Slave
Device N/A
Vendor N/A
Size N/A
LBA Mode N/A
Block Mode N/A
PIO Mode N/A
Async DMA N/A
Ultra DMA N/A
S.M.A.R.T. N/A
Type Not Installed
Auto
CDROM
ARMD
LBA/Large Mode Disabled
Auto
Block (Multi-Sector Disabled
Transfer) Mode
Auto
Revision 1.0
Options
Configure this channel to PATA or
SATA.
PATA: Parallel ATA Primary channel.
SATA: Serial ATA.
Configure this channel to PATA or
SATA.
PATA: Parallel ATA Primary channel.
SATA: Serial ATA.
th
Configure this channel to PATA or
M/A2-4 M
SATA.
rd
M/A2-3 M
PATA: Parallel ATA Primary channel.
SATA: Serial ATA.
Options
N/A
N/A.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Select the type of device connected
to the system.
Disabled: Disables LBA Mode.
Auto: Enabled LBA Mode if the
device supports it and the device is
not already formatted with LBA
Mode disabled.
Disabled: The Data transfer from
and to the device occurs one sector
at a time.
Auto: The data transfer from and to
the device occurs multiple sectors at
a time if the device supports it.
Intel order number D24635-001
Help Text
Help Text
Display detected device info
Display IDE device vendor.
Display IDE DISK size.
Display LBA Mode
Display Block Mode
Display PIO Mode
Display Async DMA mode
Display Ultra DMA mode.
Display S.M.A.R.T. support.
The Auto setting is correct in most
cases.
The Auto setting is correct in most
cases.
The Auto setting is correct in most
cases.
Description
Defines the SATA device for
this channel. If the Second
ATA is assigned SATA, this
option reverts to PATA.
Defines the SATA device for
this channel. If the First ATA is
assigned SATA, this option
reverts to PATA.
Display only. If the First ATA
or Second ATA is assigned
SATA, this option reverts to
None.
Description
63