Peripheral Configuration Submenu - Intel SE440BX - Desktop Board Motherboard Product Manual

Peripheral Configuration Submenu

This submenu is for the configuring the computer peripherals.
Table 7.

Peripheral Configuration Submenu

Feature Options
Serial port A
Base I/O
address
Interrupt
Serial port B
Mode
Base I/O
address
Interrupt
Parallel port
Disabled
Enabled
Auto (default)
3F8
2F8
3E8
2E8
IRQ 3
IRQ 4 (default)
Disabled
Enabled
Auto (default)
Normal (default)
†
IrDA
3F8
2F8 (default)
3E8
2E8
IRQ 3 (default)
IRQ 4
Disabled
Enabled
Auto (default)
SE440BX-2 Motherboard Product Guide
Description
Configures serial port A.
Auto assigns the first free COM port, normally COM1, the
address 3F8h and the interrupt IRQ4.
An * (asterisk) displayed next to an address indicates a
conflict with another device.
Specifies the base I/O address for serial port A.
Specifies the interrupt for serial port A.
Configures serial port B.
Auto assigns the first free COM port, normally COM2, the
address 2F8h and the interrupt IRQ3.
An * (asterisk) displayed next to an address indicates a
conflict with another device.
If either serial port address is set, that address will not
appear in the list of options for the other serial port.
†
If an ATI mach32 or an ATI mach64
active as an add-in card, the COM4, 2E8h address will
not appear in the list of options for either serial port.
Specifies the mode for serial port B for normal (COM 2)
or infrared applications.
Specifies the base I/O address for serial port B.
Specifies the interrupt for serial port B.
Configures the parallel port.
Auto assigns LPT1 the address 378h and the interrupt
IRQ7.
An * (asterisk) displayed next to an address indicates a
conflict with another device.
†
video controller is
continued
39