Ide Configuration - Intel SE440BX - Desktop Board Motherboard Product Manual

Using the Setup Program
Table 7. Peripheral Configuration Submenu (continued)
Feature Options
Mode
Base I/O
address
Interrupt
Audio
Legacy USB
Support

IDE Configuration

Table 8.

IDE Configuration

Feature
IDE Controller
Hard Disk Pre-Delay
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
40
Output Only
Bi-directional (default)
EPP
ECP
378
278
228
IRQ 5
IRQ 7
Disabled
Enabled (default)
Disabled (default)
Enabled
Options
Disabled
Primary
Secondary
Both (default)
Disabled (default)
3 Seconds
6 Seconds
9 Seconds
12 Seconds
15 Seconds
21 Seconds
30 Seconds
No options
No options
No options
No options
Description
Selects the mode for the parallel port.
Output Only operates in AT
Bi-directional operates in bi-directional PS/2-compatible
mode.
EPP is Extended Parallel Port mode, a high-speed bi-
directional mode.
ECP is Enhanced Capabilities Port mode, a high-speed
bi-directional mode.
Specifies the base I/O address for the parallel port.
Specifies the interrupt for the parallel port.
Enables or disables the onboard audio subsystem.
Enables or disables USB legacy support.
Description
Specifies the integrated IDE controller.
Primary enables only the Primary IDE Controller.
Secondary enables only the Secondary IDE Controller.
Both enables both IDE controllers.
Specifies the hard disk drive pre-delay.
Reports type of connected IDE device. When selected,
displays the Primary IDE Master submenu.
Reports type of connected IDE device. When selected,
displays the Primary IDE Slave submenu.
Reports type of connected IDE device. When selected,
displays the Secondary IDE Master submenu.
Reports type of connected IDE device. When selected,
displays the Secondary IDE Slave submenu.
†
-compatible mode.