Peripheral Configuration Submenu - Intel D845HV Product Manual

Intel Desktop Boards D845HV and D845WN Product Guide

Peripheral Configuration Submenu

Maintenance
This submenu shown in Table 14 is used for configuring computer peripherals.
Table 14.

Peripheral Configuration Submenu

Feature
Serial Port A
Base I/O Address
(This feature is present
only when Serial Port A
is set to Enabled)
Interrupt
(This feature is present
only when Serial Port A
is set to Enabled)
Serial Port B
Base I/O Address
(This feature is present
only when Serial Port B
is set to Enabled)
Interrupt
(This feature is present
only when Serial Port B
is set to Enabled)
54
Main
Advanced
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
Options Description
Disabled Configures serial port A.
Enabled Auto assigns the first free COM port, normally COM1, the
address 3F8h, and the interrupt IRQ4.
Auto (default)
An * (asterisk) displayed next to an address indicates a
conflict with another device.
3F8 (default) Specifies the base I/O address for serial port A, if serial port
A is Enabled.
2F8
3E8
2E8
IRQ 3 Specifies the interrupt for serial port A, if serial port A is
Enabled.
IRQ 4 (default)
Disabled Configures serial port B.
Enabled Auto assigns the first free COM port, normally COM2, the
address 2F8h, and the interrupt IRQ3.
Auto (default)
An * (asterisk) displayed next to an address indicates a
conflict with another device.
2F8 (default) Specifies the base I/O address for serial port B.
3E8
2E8
IRQ 3 (default) Specifies the interrupt for serial port B.
IRQ 4
Security Power Boot Exit
continued