How To Set The Processor Speed; Installing The Heatsink Support Top Bar; Location Of The Configuration Jumper Block - Intel SE440BX - Desktop Board Motherboard Product Manual

3. Slide the top heatsink support bar onto the retaining pins of the support's base as shown in
Figure 6.

How to Set the Processor Speed

Set the processor speed after you have installed or upgraded the processor. This procedure
assumes that the motherboard is installed in the computer and the configuration jumper block is set
to normal mode.
Figure 7 shows the location of the configuration jumper block on the motherboard. The jumper is
set to normal mode at the factory.
B
A Heatsink support bar
B Retaining pins
Figure 6. Installing the Heatsink Support Top Bar
1 3
J8A1
Figure 7. Location of the Configuration Jumper Block
SE440BX-2 Motherboard Product Guide
A
OM07179
OM07285
23