Section 4. On-Line Information And Software Sources - HP D7171A - NetServer - LPr Introduction Manual

4. On systems with multiple host adapters installed (e.g., SymBIOS, Adaptec, and HP
NetRAID SCSI adapter card) there is a special procedure required to tell
UnixWare7.1.x which controller is number 0 (the boot controller).
· Enter into DCU.
· Select the Software Devices Configurations.
· Select the Host Bus Adapters.
· Deselect the driver for any controller in the system that is not the one you are
installing to
- Select Misc, then deselect i2otrans if present, this can cause conflict wilth
the HP NetRAID card.
- Return to DCU main menu and Save @ Exit.
5. Follow the instructions in the SCO UnixWare Installation Handbook to complete
your system installation.

Section 4. On-Line Information and Software Sources

SCO World-Wide Web Access: http://www.sco.com
SCO Anonymous FTP: ftp.sco.com
HP Internet (World-Wide-Web) site: http://www.hp.com
HP Server Online Documentation CD (included with your system): includes all HP
Server documentation online