Section 1. General Tips; Case Sensitive - HP D7171A - NetServer - LPr Introduction Manual
Installing sco unixware on an hp netserver
Hide thumbs
Also See for D7171A - NetServer - LPr:
- Installation manual (182 pages) ,
- User manual (126 pages) ,
- Upgrade manual (97 pages)
Table of Contents
Advertisement
Table of Contents
Section 1. General Tips
Introduction
CaSe SeNsItIvE
Start Counting At Zero
Set Up All Cards In ECU
Installation To Disk Arrays
Utility Partition Access Disabled
Installation Media
Swap Space
Additional File Systems
Configuring Mouse Connectors
Configuring Video for UnixWare
Host Bus Adapter (HBA) Driver Tips
Driver Names for HP-Supplied Controllers
Troubleshooting
Section 2. Installing SCO UnixWare 2.1.x
Large Memory Access
SCSI Extended Translation Setting
MPS Table Setting On NetServer LS and LX for UnixWare
HP Bundled NICs Not Supported On UnixWare 2.1.x
Installing SCO UnixWare 2.1.x
Section 3. Installing SCO UnixWare 7.1.x
Section 4. On-Line Information and Software Sources
Section 1. General Tips
Introduction
The following subsections discuss problems that you may encounter when installing SCO
UnixWare 2.1.x.
SCO UnixWare installation procedures include installing SCO UNIX files, loading all
required drivers (including HBA packages), and linking information to the kernel.
As a rule, select fully configurable, rather than automatic, initialization.
CaSe SeNsItIvE
All versions of UNIX are very case sensitive and you need to be absolutely sure that you
type in the commands exactly as instructed. Almost all UNIX commands are in lower
case so if you are unsure try lower case first.
Advertisement
Table of Contents
