Section 4. On-Line Information And Software Sources; Section 5. Hp Netserver Cd Status Report - HP D6030A - NetServer - E50 Installation Manual

Windows nt 4.0 installation guide

Hide thumbs Also See for D6030A - NetServer - E50:

the Support Disk is in drive A, execute the following commands at the DOS

prompt: (You can create the HP LAN Adapter Support Disk from the Diskette

Library)

HPVGSET

If you wish to use the adapter in full duplex mode, use HPVGSET to enable

that option now.

Select "Card Test" to verify the adapter. After it passes, select "Exit program."

Connect the LAN cable to the HP DeskDirect Adapter.

4. If Windows NT asks for more Installation Diskettes than you have, e.g. asking

for Diskette #4 when you only have up to Diskette #3, make sure that the IDE

driver is installed properly. See step #7 for instructions.

5. If your system does not boot, and the screen displays an error message

"BOOT: Couldn' t find NTLDR," remove the Windows NT CD-ROM from the

drive and reboot the system again.

Section 4. On-Line Information and Software Sources

Windows NT Automated Database: Advanced Systems at (800) 936-4400

Microsoft Software BBS: 206-936-6735 (14,400 baud)

HP Networking BBS: 208-344-1691 (14,400 baud)

HP NetServer BBS: 408-553-3500 (14,400 baud)

FAX

HP has a new FAX service to ensure that you have access to the newest versions of

HP NetServer system software.

To obtain an HP NetServer CD Status Report via FAX, perform the following:

1. Call the HP FIRST FAX system at 1-800-333-1917, or if you are using a

FAX machine, call 1-208-344-4809.

2. Enter the four-digit Document ID Number (printed on the NetServer

Manager CD) when prompted. The HP NetServer CD Status Report will be

faxed to you.

Internet (World-Wide)

To obtain an HP NetServer CD Status Report via Internet, locate the four-digit

Document ID Number printed on the NetServer Manager CD and do the following:

If You Have Access to the World-Wide Web:

Table of Contents