HP D7171A - NetServer - LPr User Manual page 34

Appendix B
Figure 22. PCI Slot Changes to Powered Off
8. Verify the corresponding green Power LED on the rear of the HP
NetServer is turned off, which verifies the correct PCI slot has been
powered down.
Refer to Figure 23 and Table 6 before continuing with the procedure.
CAUTION If the LEDs on the rear of the chassis indicate power is still
applied to the slot, return to Step 2 in this procedure to ensure
you have selected the correct slot to power down. See Figure
23 and Table 6.
30
Warranty, Software License and Support