HP D7171A - NetServer - LPr User Manual page 31

Chapter 2
1. Open the Novell Configuration Manager Console (NCMCON), if it is not
already open.
CAUTION To prevent a system crash or hang never open the PCI hold-
down latch with power on to the desired slot. Always use the
software interface to turn off power to the slot before physical
removing the PCI board.
2. Select a PCI slot (P1-P10) to remove the PCI Hot Plug board (P5).
Use the Up and Down Arrow keys to select or highlight a desired PCI slot.
3. Press the Enter key when you have selected the desired slot (P5).
à
If the phpsbd.nlm is loaded, the Slot Options popup menu displays;
continue with Step 4. See Figure 19.
à
If the phpsbd.nlm is not loaded, the Slot Detailed Information screen
displays. See the Help file for more information.
Figure 19. Slot Options Menu – Remove Adapter
4. Select Remove Adapter in the Slot Options popup menu. See Figure 19.
Use the Up and Down Arrow keys to select or highlight the option.
PCI Hot Plug Utility for Novell NetWare
27