Set Switch Admin Password Dialog Box: New Switch Setup; Second Step Of New Switch Setup Completed - HP StorageWorks 1000 - Modular Smart Array User Manual

Figure 15

Set Switch Admin Password dialog box: new switch setup

8. In the Set Switch Admin Password dialog box, complete the following steps:
a. Enter the Old Password (the factory default password for the switch is password).
b. Enter a New Password (at least 8 alphanumeric characters).
c. Re-enter the new password in the Verify Password box.
d. To set the switch admin password, click OK. To cancel password setup, click Cancel.
9. A message box confirms successful password change completion. Click OK to close the message box.
The New Switch Setup dialog box now shows a check mark next to the second step, "Set switch
administrator password,"
Figure 16

Second step of New Switch Setup completed

10. A message box asks if you want to set the switch zoning. Choose one of the following options:
• To continue with the next step of switch setup, click Yes. The Set the Switch Default Zoning dialog
box (Figure
• To set the switch zoning later, click No. (See
procedure for changing the switch zoning.)
38 Getting started
(Figure 16) indicating that you have completed that task.
17) opens. Go to step 9.
"Setting the switch default zoning," page 53, for a