Figures; Storage Deployment Wizard: Select Servers (Template Deployment); Storage Deployment Wizard: Summary (Template Deployment) - HP StorageWorks 1000 - Modular Smart Array User Manual

The next Storage Deployment wizard window
Figure 95

Storage Deployment wizard: select servers (template deployment)

5. Under Server Name, select one or more check boxes indicating the server(s) to which you want to
assign (present) the logical disks in this storage subsystem, and then click Next.
NOTE:
in a clustered environment, you can select two or more servers. If you choose not to select any
servers, you must later manually assign the LUNs defined in this deployment to the servers (see
"Assigning and unassigning a logical disk to a server"
Before proceeding with configuring the storage subsystem with the selected option, the wizard displays
a summary of the selection and resulting actions, as shown in
Figure 96

Storage Deployment wizard: summary (template deployment)

124 Managing storage subsystems
In general, you should select just one server. However, if each server represents one node
(Figure 95) lists each server and its operating system.
on page 95).
Figure 96.