Four Rack Configuration (Right Module) - HP P9000 Manual

Table 19 Floor load rating and required clearances for a four rack configuration (left module)
(continued)
Floor Load
Rating
(kg/m2)
300
Notes:
1. Actual clearances for installation should be determined after consulting with construction specialist responsible for
installation building, as they could vary depending on the size/layout of the system and building conditions.
2. When various configurations of disk arrays are arranged in a row, clearance values based on the largest disk array
configuration should be used.
3. From the viewpoint of maintenance operations, it is suggested that Clearance (c) be made as large as possible.

Four rack configuration (right module)

The following figure and table shows the service clearances and floor load rating for a four-rack
configuration (Setting Up DKC-RACK in the right Configuration).
34 Installation requirements
Required Clearance (a+b) m
Clearance (c) m
C=0 C=0.2
3.0 2.6
C=0.4 C=0.6
2.3 2.0
C=0.6
1.5