Speaker Settings - Boss GT-10B Owner's Manual

Chapter 8 Parameters Guide

Speaker Settings

Type=SUPER FLAT, FLIP TOP, B MAN, CONCERT
810, BASS 360, T.E., SESSION, AC BASS
Parameter/ Explanation
Range
SP Type (Speaker Type)
Select the speaker type.
Off This turns off the speaker simulator.
This is the built-in speaker of the amp you selected
Original
with PREAMP TYPE.
This is a compact open-back speaker cabinet with
1x15"
one 15-inch speaker.
This is a compact open-back speaker cabinet with
1x18"
one 18-inch speaker.
This is a general open-back speaker cabinet with
2x15"
two 15-inch speakers.
This is an optimal speaker cabinet for a large en-
4x10"
closed amp with four 10-inch speakers.
This is a double stack of two cabinets, each with
8x10"
four 10-inch speakers.
Mic Pos (Mic Position)
This simulates the mic position.
Simulates the condition that the mic is set in the
Center
middle of the speaker cone.
Simulates the condition that the mic is moved away
1–10cm
from the center of the speaker cone.
Mic Level
0–100 Adjusts the volume of the mic.
BottomLev (Bottom Level)
Extracts the low-frequency components of the
0–100 sound input to this effect, and adjusts the amount
added to the effect sound.
DirectLev (Direct Level)
0–100 Adjusts the volume of the direct sound.
104
Type=GTR Clean, GTR Crunch, GTR Drive,
GTR Metal
Parameter/ Explanation
Range
GtrSPType (Guitar Speaker Type)
Select the speaker type.
Off This turns off the speaker simulator.
This is the built-in speaker of the amp you selected
Original
with PREAMP TYPE.
This is a compact open-back speaker cabinet with
1x8"
one 8-inch speaker.
This is a compact open-back speaker cabinet with
1x10"
one 10-inch speaker.
This is a compact open-back speaker cabinet with
1x12"
one 12-inch speaker.
This is a general open-back speaker cabinet with
2x12"
two 12-inch speakers.
This is an optimal speaker cabinet for a large en-
4x10"
closed amp with four 10-inch speakers.
This is an optimal speaker cabinet for a large en-
4x12"
closed amp with four 12-inch speakers.
This is a double stack of two cabinets, each with
8x12"
four 12-inch speakers.
Mic Type
This setting selects the simulated mic type.
This is the sound of the SHURE SM-57.
DYN57 General dynamic mic used for instruments and vo-
cals. Optimal for use in miking bass amps.
This is the sound of the SENNHEISER MD-421.
DYN421
Dynamic mic with extended low end.
This is the sound of the AKG C451B.
CND451
Small condenser mic for use with instruments.
This is the sound of the NEUMANN U87.
CND87
Condenser mic with flat response.
Simulates a mic with perfectly flat response. Pro-
FLAT duces a sonic image close to that of listening to the
sound directly from the speakers (on site).
Mic Dis (Mic Distance)
Simulates the distance between the mic and speaker.
Off Mic This setting points the mic away from the speaker.
Provides conditions whereby the mic is directed
On Mic
more towards the speaker.
Mic Pos (Mic Position)
This simulates the mic position.
Simulates the condition that the mic is set in the
Center
middle of the speaker cone.
Simulates the condition that the mic is moved away
1–10cm
from the center of the speaker cone.
Mic Level
0–100 Adjusts the volume of the mic.
BottomLev (Bottom Level)
Extracts the low-frequency components of the
0–100 sound input to this effect, and adjusts the amount
added to the effect sound.
DirectLev (Direct Level)
0–100 Adjusts the volume of the direct sound.