Assigning An Effect On/Off Switch To A Pedal - Boss GT-10B Owner's Manual

Assigning an Effect On/Off Switch to a Pedal

SYSTEM
The SYSTEM MENU screen appears.
1.
Select MANUAL SETTING.
2.
The MANUAL SETTING screen appears.
3.
Select the pedal whose assignment you want to change.
4.
Select the effect switch you want to assign to the pedal.
5.
6. To change another pedal setting, repeat Steps 4–5.
Assignable Effect Switches
Display Explanation
Off The function is not assign to the pedals.
Ch.A/B Switches between effect channel A and B.
Comp Switches the COMP on and off.
OD/DS Switches the OD/DS on and off.
Preamp Switches the PREAMP/SPEAKER on and off.
EQ Switches the EQ on and off.
FX1 Switches FX-1 on and off.
FX2 Switches FX-2 on and off.
Delay Switches the DELAY on and off.
Chorus Switches the CHORUS on and off.
Reverb Switches the REVERB on and off.
PdlFX Switches the PEDAL FX on and off.
S/R Switches the SEND/RETURN on and off.
AmpCtl Switches the Amp Control on and off.
Tuner Switches the TUNER on and off.
Chapter 4 Playing Sounds
You can also enter the MANUAL SETTING screen
from the Play screen (p. 56).
Display Explanation
PL Switches the PHRASE LOOP on and off.
PL R/P Records/plays back the phrase.
PL Clr Clears the phrase.
PL M/P Mutes playback of the phrase.
BPMTap Used for tap input of the Master BPM.
DlyTap Used for tap input of the delay time.
Controls the Start/Stop of external MIDI devices (such
MIDI
as sequencers).
Controls the Play/Stop of external MIDI devices (such
MMCPly
as hard disk recorders).
Lev+10 Increases the patch volume level by 10 units.
Lev+20 Increases the patch volume level by 20 units.
Lev -10 Decreases the patch volume level by 10 units.
Lev -20 Decreases the patch volume level by 20 units.
Switches to the next higher patch number in the same
NumInc
bank as the currently selected patch.
Switches to the next lower patch number in the same
NumDec
bank as the currently selected patch.
BnkInc Switches to the next higher bank number.
BnkDec Switches to the next lower bank number.
57