Table of Contents
Advertisement
Chapter 3 Saving a Tone
Saving a Patch (PATCH WRITE)
If you want to save the changes in the settings, carry out the Write procedure.
The patch previously stored at the write destination will be lost once the write is executed.
The PATCH WRITE screen appears.
1.
Select the write-destination User patch.
2.
The GT-10B saves the changes in the settings to the write-destination
3.
patch.
Copying Patches (PATCH COPY)
You can copy a Preset or User patch to another User patch.
The patch previously stored at the write destination will be lost once the write is executed.
1.
Select the patch you wish to copy.
2.
The PATCH COPY screen appears.
Select the copy-destination User patch.
3.
The GT-10B copies the patch selected in Step 1 to the copy-destination
4.
patch.
When no edits have been made to the currently
selected patch, the PATCH COPY screen is
displayed.
To cancel the Write procedure, press [EXIT]. The
Play screen returns to the display.
You can also use the procedure described in
"Using the Pedal to Select the Patch" (p. 31) to
select the write-destination.
If you want to name the patch or edit the name,
proceed to "Naming a Patch (PATCH NAME)" (p.
42) before you save.
"Selecting a Tone (Patch Change)" (p. 30)
When edits have been made to the currently
selected patch, the PATCH WRITE screen is
displayed.
To cancel the Copy procedure, press [EXIT]. The
Play screen returns to the display.
You can also use the procedure described in
"Using the Pedal to Select the Patch" (p. 31) to
select the copy destination.
43
Advertisement
Table of Contents
