Table of Contents
Advertisement
Chapter 4 Playing Sounds
EXP Pedal Function Quick Settings
Selecting these prepared sample settings (Quick Settings) lets you choose optimal values for the related parameters
instantly. This allows you to complete the settings simply and easily without the need to set each parameter individually.
1. Follow the procedure in "Setting CTL/EXP Functions Individually in Each Patch (PEDAL FX)" (p. 49) step 1–3
to display the PDL:CTL/EXP screen.
2.
3.
4.
Display
Quick:U**
Quick:P**
U01-1–U50-4
P01-1–P50-4
5. To save the settings, use the Write procedure (p. 43).
When SYSTEM or CONTROLLER Messages Are Displayed
These appear when the Prefernc parameter for the Controller whose settings you attempted to change (CONTROLLER
screen (p. 137)) is set to System.
This means that the settings in the PDL:CTL/EXP screen, which are the patch parameters, have no effect.
To enable the settings in the PDL:CTL/EXP screen, set the Prefernc parameter to Patch beforehand.
To dismiss this message, press [EXIT].
50
Select either WAH/FV, PB/FV, WAH, or PB.
The PDL:WAH screen or the PDL:PEDAL BEND screen appears.
Select the Quick Setting (P**, U**).
Explanation
User Quick Settings
Preset Quick Settings
User Patch
Preset Patch
When you select a User patch or Preset patch, you can use the existing patch's
assign settings just as they are.
Advertisement
Table of Contents
